Strut
bars add needed rigidity to your cars chassis, I had a generic
one laying around and decided to install it on the project
civic hatch. Very simple install.
Tools
Needed:
Socket
Wrench
14mm Socket
Short Extension
Parts
Needed:
Strut
Bar
Notes:
Same
for most all honda/Acura cars.
Here
is the strut bar. Not a whole lot to look at but it serves
its purpose well.
Start
by removing the two nuts shown in the picture.
Now
remove the two nuts from the other side.
Fit
the strut bar onto the bolts and reinstall the nuts. Your
done (I said it was simple).
